Hydraulic Press with Heated Plate Four Two Column 100-Ton Presses with single Power Unit, Light Curtains, Safety Die Blocks and Heated plates for Tier 1 Automotive Industry. The heated platens heat up to 700 degrees Fahrenheit. Phoenix Hydraulic Presses SO# 30241-30244.
Category: Hydraulic Press Video
A single control lever for the right hand and a push button for the left hand (no-tie-down) provide safety and exceptional pressure selectivity, and permit the operator to handle the work piece with the ram in a selected holding position with one or both hands removed from the controls. Operation:
Modified OGF Modified OGF (Open Gap Frame) 30-Ton “G” Frame Hydraulic Press with a 2-Post Upper Guided Tooling Plate and a Bed Beam that Pivots Up/Down, actuated by a Pneumatic Cylinder with Tooling. Designed to cut thru Urethane Material. Phoenix Hydraulic Presses SO# 30260.
Modified OGF Modified OGF (Open Gap Frame) 30-Ton “G” Frame Hydraulic Press with a 2-Post Upper Guided Tooling Plate and a Bed Beam that Pivots Up/Down, actuated by a Pneumatic Cylinder with Tooling. Designed to cut thru Urethane Material. Phoenix Hydraulic Presses SO# 30260.
200-Ton H-Frame Press We took a standard 200 Ton H-Frame Roll Bed Hydraulic Press and changed the Bed mechanism from a manual operation to a powered operation actuated by a cylinder and separate Power Unit. Brass Rollers were installed which gave our customer the capability to mover over 7,500 pounds under the ram. Phoenix Hydraulic […]